Shin sabon tsarin gina allon SPC ya yi matuƙar sauƙi?

A. Shiri kafin gini:
Tsaftace bango: A tabbatar cewa bangon yana da tsafta, babu ƙura, babu tarkace, kuma yana da faɗi kuma bushe.
Alamar aunawa: Yi amfani da matakin aunawa da kuma yiwa layin nunin shigarwa alama.
Shirya kayan aiki: Shirya manne mai tsari (kamar manne Sika), bindigar ƙusa ta iska, kayan aikin yankewa, matakin, ma'aunin tef, bindigar manne, da sauransu.

B. Tsarin shigarwa:
Sanya manne: Sanya manne na musamman ko manne na baya daidai gwargwado a bayan bangarorin bangon SPC. Idan saman bangon bai daidaita ba, ƙara yawan manne.
Sanya kayan farko: Fara daga kusurwar bango ko gefe ɗaya, manne kayan farko na allon a waje (ko kuma idan akwai buƙata), sannan ka yi amfani da matakin daidaita tsayin daka.
Madaurin haɗi: Saka madaurin namiji a cikin madaurin mace na baya a kusurwar karkata digiri 15-20 a kan allo na biyu sannan a ɗaure shi sosai.
Daidaita da gyarawa: Yi amfani da guduma ta roba don danna saman allon a hankali don sanya haɗin maƙallin ya yi ƙarfi, duba lanƙwasa, kuma idan ya cancanta, yi amfani da bindigar ƙusa ta iska don ƙarfafa maƙallin a wuraren da ba a san su ba.

C. Kusurwa da Gefen:
Maganin kusurwar Yin Yang: Yi amfani da layukan kusurwa na musamman don rufe kusurwoyin bango, ko yanke allon don haɗa tauri (haɗin gwiwa mai faɗi).
Yankewa da Rabawa: Lokacin da ake cin karo da soket da makulli, ya zama dole a auna da kuma yanke allon daidai.
Gyaran ƙarshe: Yi amfani da allon siket da sandunan gefe don kammalawa, sannan a cika gidajen da manne mai tsari ko manne mai gilashi.

D. Bayani:
Ya kamata a sanya bangarorin bango na SPC bayan an amince da ayyukan ɓoye kamar hana ruwa da ruwa da wutar lantarki.
A lokacin shigarwa, ya kamata a ajiye ƙananan haɗin faɗaɗa bisa ga takamaiman halayen allon.
Zai fi kyau a sanya allunan bango masu launuka iri ɗaya amma daban-daban a wurare daban-daban domin guje wa bambancin launi.